Headlight FAQs

Why is there still a gap after the lamp is installed? Is it normal?

The headlight assembly is designed according to the original car mold, because the original car headlight also has site barriers, so there will be a little gap after installing the car light, generally about 0.3cm difference from the original car headlight assembly seam gland, in order to Avoid excessive gaps that affect the appearance,

First of all, you need to find a professional installation shop and master. If there is a seam during the installation process, you can slowly adjust it. When it is adjusted to the same position, then slowly fix the screw, but do not fix it too tightly. Fine-tune until the position matches. Then tighten all the screws, there will be more or less hidden seams, but it will not affect the normal use of the product

Why does the car wash with fog after installing the lights? Is it normal?

All products are mature at this stage, and this problem has been solved. After new lights are installed, the cause of fog may be affected by

Influenced by the weather, the assembly material may contain moisture, which is released at high temperature to form fog, or the car is washed after the lamp is installed.

When it rains, after the hot air in the lamp is removed, the lamp suddenly encounters cold air and shrinks in a vacuum, so that it is easy to absorb water vapor and form

Fog or water droplets, causing water ingress. When this happens, check first - whether all sealing positions of the headlights are tight.

Seal it well, and check whether the mouth of the breathable hose is installed downwards. The mist produced after removing the sealed situation will spontaneously disappear within 3-7 days.

It has slowly dissipated, and the fog e formed by the lamp is not a quality problem, please rest assured to use it.

Car headlights, car headlight assembly, car modification interior accessories, commercial vehicle exterior parts, manufacturers, factory direct sales, Vito headlights